Hence when they use their printing machine, it is possible that they get the difficulties in operating the printer itself. Hopefully this is enough information to tell whic firmware you need to use. Service Support Tool Canon Download This Canon Then, although this device is innovated with modern technologies, it does not mean that there will be not any problem which can be faced by the users. If your copier has a N boot rom it will almost certainly have a NIC (aka ethernet port) as well. If the number has a N next to it, it uses N firmware otherwise not. If you can get into service mode go to Copier > Display > Version > BOOT-ROM. If it says IR3300(IR2200) it doesn't have it, if it says IR3300(IR2200N) it does. If your copier was working normally you could press the counter check button. There is different firmware depending on whether it has a N boot rom installed or not. Even if it does work the drive will probably fail soon so be prepared to replace it.Īs this is a very old copier to use the SST with it you will need a nethawk cable (Screwtape posted the new part # in a thread recently) or a IEEE1284 bi-directional parallel cable. If this doesn't work you'll need to replace the hdd. This will do a hard drive scan possibly making the drive usable again then format the hdd and load firmware using sst. If you haven't already you can try pressing 1 and 9 when you turn the copier on. So I wanted to reinitialise the harddisk. I have the IR 3300 giving the error code E602-003.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |